Written by ARB Clinic Content Team – Medically reviewed by Dr. Afsheen Bilal
Last reviewed: 21 July 2026
Leading Dual-Wavelength Laser for Acne Scars, Texture & Fine Lines
Your skin tells different story but acne scars, uneven texture, and early signs of ageing don’t have to be part of it forever. If these concerns affect your confidence, choosing the right treatment can make all the difference.
Alma Hybrid is Islamabad’s most advanced dual-wavelength resurfacing laser, combining fractional CO₂ and 1570 nm technology in a single FDA-cleared platform. At ARB Clinic Islamabad, Dr. Afsheen Bilal, a dermatologist with 21 years of clinical experience, builds every treatment plan around your specific skin, not a fixed package.
If your acne scars, uneven texture, or early fine lines have made you hesitant in photos or in person, this is the treatment built to change that.
Alma Hybrid at a Glance
| Treatment | Alma Hybrid fractional laser resurfacing |
| Clinic | ARB Clinic Islamabad |
| Doctor | Dr. Afsheen Bilal — MBBS Gold Medalist, FCPS Dermatology, 21 years’ experience |
| Location | House A-58, Main Margalla Road, F-7/2, Islamabad |
| Technology | Fractional CO₂ laser + 1570 nm non-ablative laser, FDA 510(k) cleared |
| Best for | Acne scars, uneven texture, fine lines, selected pigmentation |
| Typical downtime | 3–7 days, depending on treatment intensity |
| Starting price | final price confirmed after assessment |
What Is Alma Hybrid?
Alma Hybrid is an FDA-cleared dual-wavelength laser platform used for fractional skin resurfacing. It combines an ablative 10,600 nm CO₂ laser with a non-ablative 1570 nm laser in one device, giving Dr. Afsheen Bilal precise control over treatment depth and intensity for every patient.
Fractional treatment means the laser targets microscopic columns of skin while leaving the surrounding tissue untouched. This speeds healing while still delivering strong resurfacing results, which is exactly why Alma Hybrid is trusted for acne scars, textural irregularities, and fine lines.
How the two wavelengths work:
- CO₂ laser (10,600 nm): Ablative, removes and resurfaces the outer skin layer to improve visible scars, roughness, and fine lines.
- 1570 nm laser: Non-ablative, heats the deeper skin layer to stimulate collagen remodelling without removing the surface.
- HyGrid technology: Lets Dr. Afsheen Bilal blend both wavelengths in a ratio matched to your skin type and downtime preference.
Alma Hybrid vs. Other Skin Resurfacing Treatments
Choosing the right treatment comes down to one trade-off: how much downtime you can accept versus how much improvement you want to see. Here’s how Alma Hybrid compares to the full range of available options.
| Treatment | Best For | Typical Downtime |
|---|---|---|
| Alma Hybrid | Acne scars, deeper texture, fine lines | 3–7 days |
| Traditional Full-Field CO₂ Laser | Severe scarring, major resurfacing | 10–14+ days |
| Deep Chemical Peel (TCA/Phenol) | Deep scarring, severe pigmentation | 14–21+ days |
Downtime ranges are general clinical estimates. Your exact recovery time is confirmed by Dr. Afsheen Bilal after a skin assessment.
Why this matters: Alma Hybrid sits in the sweet spot, it delivers meaningfully stronger results than gentle maintenance treatments, without the extended recovery of traditional full-field CO₂ resurfacing or deep chemical peels. For most patients with moderate acne scarring or textural concerns, this is the balance that makes the most sense.
How Does Alma Hybrid Work?
Alma Hybrid works by triggering a controlled healing response in the skin. The CO₂ wavelength resurfaces the outer layer to improve visible scars and roughness, while the 1570 nm wavelength heats the deeper dermis to stimulate collagen remodelling over time.
Dr. Afsheen Bilal adjusts the ratio, density, and depth of both wavelengths for every patient using Alma’s HyGrid mode, meaning your treatment is calibrated to your skin condition and your tolerance for downtime, not a generic clinic setting.
Why ARB Clinic Is Islamabad’s Trusted Choice for Alma Hybrid
Led by Dr. Afsheen Bilal
MBBS Gold Medalist, Dip in Derm (AFPGMI), FCPS Dermatology, with 21 years of clinical dermatology experience. Every Alma Hybrid treatment plan at ARB Clinic is built and supervised by Dr. Afsheen Bilal personally,not a technician following a fixed protocol.
FDA-Cleared, Dual-Wavelength Technology
ARB Clinic uses the Alma Hybrid platform, combining ablative and non-ablative lasers in one FDA-cleared device, giving you access to precision resurfacing calibrated specifically to your skin.
Built for Pakistani and South Asian Skin
Medium-to-deep skin tones carry a higher risk of pigmentation complications after aggressive laser treatment. Dr. Afsheen Bilal’s protocols are specifically calibrated for the skin tones most common across Islamabad and Pakistan.
A Personalised Plan, Not a Package
Your treatment density, depth, and intensity are set after a real skin assessment — never chosen from a fixed menu or based only on your age.
Book Your Consultation With Dr. Afsheen Bilal
Who Is a Good Candidate for Alma Hybrid?
You may be a strong candidate if you:
- Have acne scars, rough texture, fine lines, or selected tone irregularities
- Are in generally good health
- Can follow pre-treatment and aftercare instructions
- Can limit sun exposure during recovery
Treatment may need to be delayed or modified if you have:
- Active acne, infection, or open wounds in the treatment area
- Active cold sores or frequent herpes outbreaks
- Recent tanning or sunburn
- Active eczema, dermatitis, or psoriasis flare-ups
- A history of keloid scarring
- Uncontrolled diabetes or a condition affecting immunity/healing
- Pregnancy or breastfeeding
- A history of isotretinoin use (discuss timing with your dermatologist)
Not Sure If You’re a Candidate?
The Alma Hybrid Treatment Process at ARB Clinic
- Consultation: Dr. Afsheen Bilal examines your skin, scars, and history to confirm Alma Hybrid is right for you.
- Pre-Treatment Preparation: Skincare adjustments and sun protection guidance before your session.
- Numbing: Topical anaesthetic applied and given time to take effect.
- Laser Treatment: CO₂, 1570 nm, or a customised blend, applied using the handpiece suited to your concern.
- Post-Treatment Care: Cooling and protective product applied, with full aftercare instructions.
- Follow-Up: Progress reviewed and further sessions planned if needed.
What Results Can You Expect?
In the first few days, skin may appear red, swollen, or slightly darker, with mild peeling as it heals. Once this initial recovery passes, most patients notice smoother-feeling skin, softer fine lines, and gradual improvement in acne scars — with results continuing to develop over the following weeks as collagen remodels.
Results are long-lasting, though ongoing sun protection and skincare help maintain them, since Alma Hybrid does not stop natural ageing or future sun damage.
Ready to See What Alma Hybrid Can Do for Your Skin?
The right treatment plan starts with an accurate skin assessment — not a guess. Dr. Afsheen Bilal will review your skin tone, scar pattern, and goals, and build a plan matched specifically to you.
Call: +92 315 1620207 – WhatsApp Us – House A-58, Main Margalla Road, F-7/2, Islamabad
Frequently Asked Questions
Is Alma Hybrid Painful?
Most patients feel warmth, prickling, or a brief snapping sensation rather than significant pain. A topical anaesthetic is applied before every session to keep you comfortable, and more intensive CO₂ settings feel stronger than lighter non-ablative passes.
How Many Alma Hybrid Sessions will I Need?
Most patients need a series of sessions spaced weeks apart for visible acne scar or texture improvement, though some milder concerns respond to a single session. Dr. Afsheen Bilal confirms your exact treatment plan during your assessment.
How Much Downtime Does Alma Hybrid Have?
Downtime typically ranges from mild redness lasting a day or two, up to 7 days of redness, crusting, and peeling for stronger CO₂-intensity sessions. Your expected recovery is explained clearly before you book.
Is Alma Hybrid Safe for Dark or Pakistani Skin Tones?
Yes, Alma Hybrid is regularly used on medium and deeper skin tones, including the skin tones most common in Pakistan. Dr. Afsheen Bilal uses a conservative protocol, pre-treatment skin preparation, and strict sun protection guidance to reduce the risk of post-inflammatory pigmentation in darker skin.
Can Alma Hybrid Remove Acne Scars Completely?
Alma Hybrid delivers visible, lasting improvement in acne scars, but no laser can guarantee complete removal of every scar type. Deep ice-pick or tethered scars may be combined with subcision, TCA CROSS, or other techniques for the best result.
When Will I See Results after Alma Hybrid?
Initial improvement becomes visible once redness and peeling settle, usually within few days. Full results continue developing over the following weeks as collagen remodelling progresses.
How Long Do Alma Hybrid Results Last?
Improvements in treated scars and texture are long-lasting. Since skin continues to age and can develop new sun damage or acne, daily sunscreen and a maintenance skincare routine help preserve your results.
Is Alma Hybrid the Same as a Traditional Fractional CO₂ Laser?
No. Alma Hybrid includes fractional CO₂ technology but adds a non-ablative 1570 nm wavelength in the same device. This dual-wavelength design lets Dr. Afsheen Bilal balance resurfacing power against downtime something a single-wavelength CO₂ laser can’t do.
Is Alma Hybrid FDA-Cleared?
Yes. The Alma Hybrid Laser System holds US FDA 510(k) clearance as a Class II medical laser system for dermatological resurfacing procedures.
